Making The Printer Ready To Send And Receive Faxes (Using Fax Setting Wizard) - Epson WorkForce WF-2835DWF User Manual

User's Guide
3. Select Fax on the home screen.
To select an item, use the
4. Pick up the handset.
A connection has been established when the message to press
on the screen.
Related Information
"Making the Printer Ready to Send and Receive Faxes (Using Fax Setting Wizard)" on page 68
&
"Making Settings to Use an Answering Machine" on page 72
&
"Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)" on page 72
&
"Setting Receive Mode" on page 70
&
Making the Printer Ready to Send and Receive Faxes
(Using Fax Setting Wizard)
Fax Setting Wizard configures the basic fax features to make the printer ready to send and receive faxes.
The Wizard is displayed automatically when the printer is turned on for the first time. You can also display the
wizard manually from the printer's control panel. You need to run the wizard again in case the wizard is skipped
when the printer is first turned on or when the connection environment has changed.
❏ The items below are what you can set through the wizard.
❏ Header (Your Phone Number and Fax Header)
❏ Receive Mode (Auto or Manual)
❏ The items below are set automatically according to the connection environment.
❏ Dial Mode (such as Tone or Pulse)
❏ Line Type (PSTN or PBX)
❏ Dial Tone Detection
❏ DRD Setting
❏ Other items in Basic Settings remain as they are.
Start Fax Setting Wizard to make Basic Settings, following the on-screen instructions.
Fax Settings
u d l r
buttons, and then press the OK button.
x
to start sending or receiving a fax is displayed
68