Epson Stylus Pro 7800 User Manual page 238

4. Select a parameter.
Press the Paper Feed d button or Paper Feed u button to
select a parameter for the item.
5. Set the parameter.
Press the Enter
If the parameter is used for execution only, press the Enter
button to execute the function for the item.
Note:
If a second parameter is displayed on the LCD, repeat steps 4 and 5
to select and set the second parameter.
6. Exit the maintenance mode.
Press the Power
turn it on again.
238
Maintenance Mode
button to store the selected parameter.
button to turn off the printer, and then