Converting The Black Ink Cartridges - Epson Stylus Pro 7800 User Manual

Converting the Black Ink Cartridges

You can change the black ink according to your purpose. You can
choose either Matte Black or Photo Black.
Caution:
c
To avoid interrupting a black ink change, observe the following
conditions:
❏ Do not turn off the printer.
❏ Do not open the front cover.
❏ Do not move the paper lever to the released position.
❏ Do not remove the ink cartridges.
❏ Do not remove the maintenance tank.
❏ Do not unplug the power cord.
Note:
❏ If an electrical power failure occurs during this operation, turn the
printer on again. You can continue your procedure at the
breakpoint.
❏ The Black Ink Conversion Kit is required when changing the black
ink. Also, the black ink cartridge (either Matte or Photo that you
want to convert) is required. To check the product code, see
"Consumable Products" on page 375.
❏ If the maintenance tank icon tells that the maintenance tank is full
or near full on the LCD, you need to replace the maintenance tank.
See "Replacing the Maintenance Tank" on page 299.
To change the black ink, follow the steps below.
1. Make sure that READY appears on the LCD panel.
290
Maintenance and Transportation