Editing Ppp Options; Figure 24-5 Menu 11.2: Remote Node Ppp Options - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
Table 24-5 Menu 11.1 Remote Node Profile (Backup ISP)
FIELD
Edit IP This field leads to a "hidden" menu. Press [SPACE BAR] to select Yes and
press [ENTER] to go to Menu 11.3 - Remote Node Network Layer
Options. See section 24.8 for more information.
Edit Script Press [SPACE BAR] to select Yes and press [ENTER] to edit the AT script
Options for the dial backup remote node (Menu 11.4 - Remote Node Script). See
section 24.9 for more information.
Telco Option
Allocated Enter the maximum number of minutes that this remote node may be
Budget called within the time period configured in the Period field. The default for
this field is 0 meaning there is no budget control and no time limit for
accessing this remote node.
Period(hr) Enter the time period (in hours) for how often the budget should be reset.
For example, to allow calls to this remote node for a maximum of 10
minutes every hour, set the Allocated Budget to 10 (minutes) and the
Period to 1 (hour).
Schedules You can apply up to four schedule sets here. For more details please refer
to the Call Schedule Setup chapter.
Nailed-Up Press [SPACE BAR] to select Yes to set this connection to always be on,
Connection regardless of whether or not there is any traffic. Select No to have this
connection act as a dial-up connection.
Session
Options
Edit Filter sets This field leads to another "hidden" menu. Use [SPACE BAR] to select Yes
and press [ENTER] to open menu 11.5 to edit the filter sets. See section
24.10 for more details.
Idle Timeout Enter the number of seconds of idle time (when there is no traffic from the
ZyWALL to the remote node) that can elapse before the ZyWALL
automatically disconnects the PPP connection. This option only applies
when the ZyWALL initiates the call.
Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.

24.7 Editing PPP Options

The ZyWALL's dial back-up feature uses PPP. To edit the remote node PPP Options, move the cursor
to the [Edit PPP Options] field in Menu 11.1 - Remote Node Profile, and use the space bar to select
[Yes]. Press [Enter] to open Menu 11.2 as shown next.
24-6
DESCRIPTION
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Enter here to CONFIRM or ESC to CANCEL:

Figure 24-5 Menu 11.2: Remote Node PPP Options

EXAMPLE
No
(default)
No
(default)
0
(default)
0
(default)
No
(default)
No
(default)
100 seconds
(default)
WAN and Dial Backup Setup