ZyXEL Communications ZyWALL 5 User Manual page 533

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ip
certificates
ras>
Use sys logs category followed by a log category to display the parameters that are
3.
available for the category.
ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/1:show debug type]
Use sys logs category followed by a log category and a parameter to decide what to
4.
record.
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only
alerts for that category, and 3 to record both logs and alerts for that category. Not every parameter
is available with every category.
Use the sys logs save command to store the settings in the ZyWALL (you must do this in
5.
order to record logs).
Use the sys logs display command to show all of the logs in the ZyWALL's log.
Use the sys logs category display command to show the log settings for all of the
log categories.
Use the sys logs display [log category] command to show the logs in an
individual ZyWALL log category.
Use the sys logs clear command to erase all of the ZyWALL's logs.
Log Command Example
This example shows how to set the ZyWALL to record the access logs and alerts and then view the
results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
Log Descriptions
exit
ipsec
cnm
Diagram P-1 Displaying Log Categories Example
Diagram P-2 Displaying Log Parameters Example
Displaying Logs
ZyWALL 5 Internet Security Appliance
ether aux
bridge bm
8021x radius
P-15