Ipsec Summary Screen; Figure 39-3 Menu 27.1: Ipsec Summary; Table 39-1 Menu 27.1: Ipsec Summary - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance

39.2 IPSec Summary Screen

Type 1 in menu 27 and then press [ENTER] to display Menu 27.1 — IPSec Summary. This is a
summary read-only menu of your IPSec rules (tunnels). Edit or create an IPSec rule by selecting an
index number and then configuring the associated submenus.
# Name A
Key Mgt
--- -------- -
001 Taiwan Y
IKE
002 zw50 N
IKE
003 China N
IKE
004
005
Select Command= None
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
FIELD
# This is the VPN policy index number.
Name This field displays the unique identification name for this VPN rule. The name
may be up to 32 characters long but only 10 characters will be displayed
here.
A Y signifies that this VPN rule is active.
Local Addr When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
Start Single, this is a static IP address on the LAN behind your ZyWALL.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
Range, this is the beginning (static) IP address, in a range of computers on
the LAN behind your ZyWALL.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
SUBNET, this is a static IP address on the LAN behind your ZyWALL.
Addr End / When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
Single, this is the same (static) IP address as in the Local Addr Start field.
Mask
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
Range, this is the end (static) IP address, in a range of computers on the
LAN behind your ZyWALL.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to
SUBNET, this is a subnet mask on the LAN behind your ZyWALL.
This field displays Tunnel mode or Transport mode. See earlier for a
Encap
discussion of these. You need to finish configuring the VPN policy in menu
27.1.1.1 or 27.1.1.2 if ??? is displayed.
39-2
Menu 27.1 – IPSec Summary
Local Addr Start - Addr End / Mask
Remote Addr Start - Addr End / Mask
----------------- ---------------
192.168.1.35
172.16.2.40 172.16.2.46
1.1.1.1 1.1.1.1
4.4.4.4 255.255.0.0
192.168.1.40
N/A N/A

Figure 39-3 Menu 27.1: IPSec Summary

Table 39-1 Menu 27.1: IPSec Summary

DESCRIPTION
Encap
------
192.168.1.38
Tunnel AH SHA1
192.168.1.42
Select Rule= N/A
IPSec Algorithm
Secure Gw Addr
------------------
Tunnel ESP AES MD5
193.81.13.2
zw50test.zyxel.
Tunnel ESP DES MD5
0.0.0.0
EXAMPLE
1
Taiwan
Y
192.168.1.35
192.168.1.38
Tunnel
VPN/IPSec Setup