Editing Ppp Options - ZyXEL Communications ZYWALL 10W User Manual

Table 5-5 Fields in Menu 11.1 Remote Node Profile (Backup ISP)
FIELD
Period(hr) Enter the time period (in hours) for how often the budget should be
reset. For example, to allow calls to this remote node for a maximum
of 10 minutes every hour, set the Allocated Budget to 10 (minutes)
and the Period to 1 (hour).
Nailed-Up Press [SPACE BAR] to select Yes to set this connection to always be
Connection on, regardless of whether or not there is any traffic. Select No to have
this connection act as a dial-up connection.
Session
Options
Edit Filter sets This field leads to another "hidden" menu. Use [SPACE BAR] to select
Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See
section 5.11 for more details.
Idle Timeout Enter the number of seconds of idle time (when there is no traffic from
the ZyWALL to the remote node) that can elapse before the ZyWALL
automatically disconnects the PPP connection. This option only
applies when the ZyWALL initiates the call.
Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
5.8

Editing PPP Options

The ZyWALL's dial back-up feature uses PPP. To edit the remote node PPP Options, move the cursor to the
[Edit PPP Options] field in Menu 11.1 - Remote Node Profile, and use the space bar to select [Yes]. Press
[Enter] to open Menu 11.2 as shown next.
WAN and Dial Backup Setup
ZyWALL 10~100 Series Internet Security Gateway
DESCRIPTION EXAMPLE
0
(default)
No
(default)
No
(default)
100
seconds
(default)
5-9