Appendix P Log Descriptions - ZyXEL Communications ZyWALL 5 User Manual

LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP: %s
DHCP client IP expired
DHCP server assigns %s
Successful SMT login
SMT login failed
Successful WEB login
WEB login failed
Successful TELNET login
TELNET login failed
Successful FTP login
FTP login failed
NAT Session Table is Full!
Starting Connectivity
Monitor
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
Connect to Daytime server
fail
Connect to Time server fail
Connect to NTP server fail
Too large ICMP packet has
been dropped
SMT Session Begin
SMT Session End
Configuration Change: PC =
0x%x, Task ID = 0x%x
Log Descriptions
Chart P-1 System Maintenance Logs
The router has adjusted its time based on information from the time
server.
The router failed to get information from the time server.
A WAN interface got a new IP address from the DHCP, PPPoE,
PPTP or dial-up server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's SMT interface.
Someone has failed to log on to the router's SMT interface.
Someone has logged on to the router's web configurator interface.
Someone has failed to log on to the router's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via ftp.
Someone has failed to log on to the router via ftp.
The maximum number of NAT session table entries has been
exceeded and the table is full.
Starting Connectivity Monitor.
The router got the time and date from the Daytime server.
The router got the time and date from the time server.
The router got the time and date from the NTP server.
The router was not able to connect to the Daytime server.
The router was not able to connect to the Time server.
The router was not able to connect to the NTP server.
The router dropped an ICMP packet that was too large.
An SMT management session has started.
An SMT management session has ended.
The router is saving configuration changes.
ZyWALL 5 Internet Security Appliance
Appendix P
Log Descriptions
DESCRIPTION
P-1