Shutdown; Overview; What You Need To Know; The Shutdown Screen - ZyXEL Communications ZyWALL USG 50 User Manual

C
H A P T E R

51.1 Overview

Use this to shutdown the device in preparation for disconnecting the power. See
also Section 1.5 on page 35
ZyWALL.
Always use the Maintenance > Shutdown > Shutdown screen or
the "shutdown" command before you turn off the ZyWALL or
remove the power. Not doing so can cause the firmware to become
corrupt.

51.1.1 What You Need To Know

Shutdown writes all cached data to the local storage and stops the system
processes.

51.2 The Shutdown Screen

To access this screen, click Maintenance > Shutdown.
Figure 466 Maintenance > Shutdown
Click the Shutdown button to shut down the ZyWALL. Wait for the device to shut
down before you manually turn off or remove the power. It does not turn off the
power.
You can also use the CLI command shutdown to shutdown the ZyWALL.
ZyWALL USG 50 User's Guide
for information on different ways to start and stop the
51

Shutdown

777