Vlan Summary Screen - ZyXEL Communications ZyWALL USG 50 User Manual

Chapter 11 Interfaces
• Between the router and VLAN 3.
VLAN Interfaces Overview
In the ZyWALL, each VLAN is called a VLAN interface. As a router, the ZyWALL
routes traffic between VLAN interfaces, but it does not route traffic within a VLAN
interface. All traffic for each VLAN interface can go through only one Ethernet
interface, though each Ethernet interface can have one or more VLAN interfaces.
Note: Each VLAN interface is created on top of only one Ethernet interface.
Otherwise, VLAN interfaces are similar to other interfaces in many ways. They
have an IP address, subnet mask, and gateway used to make routing decisions.
They restrict bandwidth and packet size. They can provide DHCP services, and
they can verify the gateway is available.

11.6.1 VLAN Summary Screen

This screen lists every VLAN interface and virtual interface created on top of VLAN
interfaces. To access this screen, click Configuration > Network > Interface >
VLAN.
Figure 165 Configuration > Network > Interface > VLAN
Each field is explained in the following table.
Table 63 Configuration > Network > Interface > VLAN
LABEL
Edit
Remove
Activate
Inactivate
Create
Virtual
Interface
254
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you
can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you
want to remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To open the screen where you can create a virtual interface, select an
interface and click Create Virtual Interface.
ZyWALL USG 50 User's Guide