ZyXEL Communications ZyWALL USG 50 User Manual page 178

Chapter 9 Monitor
You use the Traffic Statistics screen to tell the ZyWALL when to start and when
to stop collecting information for these reports. You cannot schedule data
collection; you have to start and stop it manually in the Traffic Statistics screen.
Figure 125 Monitor > System Status > Traffic Statistics
There is a limit on the number of records shown in the report. Please see
on page 180
screen.
Table 29 Monitor > System Status > Traffic Statistics
LABEL
Data Collection
Collect
Statistics
Apply
Reset
Statistics
Interface
178
for more information. The following table describes the labels in this
DESCRIPTION
Select this to have the ZyWALL collect data for the report. If the ZyWALL
has already been collecting data, the collection period displays to the
right. The progress is not tracked here real-time, but you can click the
Refresh button to update it.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Select the interface from which to collect information. You can collect
information from Ethernet, VLAN, bridge and PPPoE/PPTP interfaces.
Table 30
ZyWALL USG 50 User's Guide