Cellular Status Screen - ZyXEL Communications ZyWALL USG 50 User Manual

The following table describes the labels in this screen.
Table 34 Monitor > System Status > Login Users
LABEL
#
User ID
Reauth Lease
T.
Type
IP address
Force Logout
Refresh

9.9 Cellular Status Screen

This screen displays your 3G connection status. click Monitor > System Status
> Cellular Status to display this screen.
Figure 130 Monitor > System Status > Cellular Status
The following table describes the labels in this screen.
Table 35 Monitor > System Status > Cellular Status
LABEL
Refresh
More
Information
#
Extension Slot
ZyWALL USG 50 User's Guide
DESCRIPTION
This field is a sequential value and is not associated with any entry.
This field displays the user name of each user who is currently logged in
to the ZyWALL.
This field displays the amount of reauthentication time remaining and
the amount of lease time remaining for each user. See
page 591.
This field displays the way the user logged in to the ZyWALL.
This field displays the IP address of the computer used to log in to the
ZyWALL.
Click this icon to end a user's session.
Click this button to update the information in the screen.
DESCRIPTION
Click this button to update the information in the screen.
display more information on your 3G, such as the
Click this to
signal strength, IMEA/ESN and IMSI. This is only available when
the 3G device attached and activated on your ZyWALL. Refer to
Section 9.9.1 on page
This field is a sequential value, and it is not associated with any
interface.
This field displays where the entry's cellular card is located.
187.
Chapter 9 Monitor
Chapter 35 on
185