Core Dump Files Screen - ZyXEL Communications ZyWALL USG 50 User Manual

The following table describes the labels in this screen.
Table 244 Maintenance > Diagnostics > Core Dump
LABEL
Save core dump to
USB storage (if
ready)
Apply
Reset

48.4.1 Core Dump Files Screen

Click Maintenance > Diagnostics > Core Dump > Files to open the core dump
files screen. This screen lists the core dump files stored on the ZyWALL or a
connected USB storage device. You may need to send these files to customer
support for troubleshooting.
Figure 451 Maintenance > Diagnostics > Core Dump > Files
The following table describes the labels in this screen.
Table 245 Maintenance > Diagnostics > Core Dump > Files
LABEL
Remove
Download
#
File Name
ZyWALL USG 50 User's Guide
DESCRIPTION
Select this to have the ZyWALL save a process's core dump to an
attached USB storage device if the process terminates abnormally
(crashes). If you clear this option the ZyWALL only saves
Click Apply to save the changes.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select files and click Remove to delete them from the ZyWALL. Use the
[Shift] and/or [Ctrl] key to select multiple files. A pop-up window asks you
to confirm that you want to delete.
Click a file to select it and click Download to save it to your computer.
This column displays the number for each packet capture file entry. The
total number of packet capture files that you can save depends on the file
sizes and the available flash storage space.
This column displays the label that identifies the file.
Chapter 48 Diagnostics
765