Join Your Wireless Network; Wps Method - NETGEAR JNR1010 User Manual

Parental Controls. Download and set up parental controls to prevent objectionable
•
content from reaching your computers.
Guest Network. Set up a guest network to allow visitors to use your router's Internet
•
connection.
FastLane. Enable FastLane mode to reserve bandwidth on the router for a trusted IP
•
address that you specify.
Advanced tab. Set the router up for unique situations such as when remote access by IP
•
or by domain name from the Internet is needed. See
Using this tab requires a solid understanding of networking concepts.
Help & Support. Go to the NETGEAR support site to get information, help, and product
•
documentation. These links work once you have an Internet connection.

Join Your Wireless Network

Choose either the manual or the WPS method to join your wireless network. See
on page 28 for instructions for how to set up a guest network.
Networks

WPS Method

Wi-Fi Protected Setup (WPS) lets you connect to a secure WiFi network without typing its
password. Instead, you press a button or enter a PIN. NETGEAR calls WPS Push 'N'
Connect.
Some older WiFi equipment is not compatible with WPS. WPS works only with WPA2 or WPA
wireless security.

To use WPS to join the wireless network:
Press the WPS button on the left side of the router.
1.
Within 2 minutes, press the WPS button on your wireless computer or device, or follow the
2.
WPS instructions that came with the device.
The WPS process automatically sets up your wireless computer with the network
password, and connects you to the wireless network.
N150 4-Port Wireless Router JNR1010
Getting Started with NETGEAR genie
16
Chapter 7, Advanced Settings.
Guest