Set Up The Base Station - NETGEAR JNR1010 User Manual

Disable Wireless Client Association. If your router is the base station, selecting this
•
check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
Repeater MAC Address (1 through 4). If your router is the base station, it can act as the
•
"parent" of up to 4 other access points. Enter the MAC addresses of the other access
points in these fields.

Set Up the Base Station

The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You must know the wireless settings for both units. You must know the MAC
address of the remote unit. Set up the base station first, and then set up the repeater.

To set up the base station:
Set up both units with the same wireless settings (SSID, mode, channel, and security).
1.
The wireless security option must be set to None or WEP.
Select Advanced > Advanced Setup > Wireless Repeating Function to display the
2.
Wireless Repeating Function screen.
In the Wireless Repeating Function screen, select the Enable Wireless Repeating
3.
Function check box and select the Wireless Base Station radio button.
Enter the MAC address for one or more repeater units.
4.
Click Apply to save your changes.
5.
N150 4-Port Wireless Router JNR1010
Advanced Settings
67