Guest Network Wireless Security Options; Fastlane - NETGEAR JNR1010 User Manual

N150 4-Port Wireless Router JNR1010

Guest Network Wireless Security Options

A security option is the type of security protocol applied to your wireless network. The
security protocol in force encrypts data transmissions and ensures that only trusted devices
receive authorization to connect to your network. Wi-Fi Protected Access (WPA) has several
options including pre-shared key (PSK) encryption.
This section presents an overview of the security options and provides guidance on when to
use which option. It is possible to set up a guest network without wireless security.
NETGEAR does not recommend doing so.
WPA Encryption
WPA encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means
that the product is authorized by the Wi-Fi Alliance (http://www.wi-fi.org/) because it complies
with the worldwide single standard for high-speed wireless local area networking.
WPA uses a passphrase to perform authentication and generate the initial data encryption
keys, then it dynamically varies the encryption key. WPA-PSK uses Temporal Key Integrity
Protocol (TKIP) data encryption, implements most of the IEEE 802.11i standard, and is
designed to work with all wireless network interface cards, but not all wireless access points.
It is superseded by WPA2-PSK.
WPA2-PSK is stronger than WPA-PSK. It is advertised to be theoretically indecipherable due
to the greater degree of randomness in encryption keys that it generates. WPA2-PSK gets
higher speed because it is usually implemented through hardware, while WPA-PSK is usually
implemented through software. WPA2-PSK uses a passphrase to authenticate and generate
the initial data encryption keys. Then it dynamically varies the encryption key.
WPS-PSK + WPA2-PSK Mixed Mode can provide broader support for all wireless clients.
WPA2-PSK clients get higher speed and security, and WPA-PSK clients get decent speed
and security.

FastLane

You can use the FastLane feature to reserve bandwidth on the router for a trusted IP address
that you specify. The first time you turn on FastLane, you should specify the amount of
bandwidth you want to reserve and set up the push button for FastLane.
FastLane prevents others from using up your bandwidth. When you connect to the router
from the trusted IP address, you have guaranteed bandwidth for video steaming applications.
genie Basic Settings
29