Front-Right Floor Plate; Upper Side; Floor Plate; Rear-Left - One Stop Gardens 93358 Owner's Manual

Floor Plate Installation Instructions
Front Floor
Plate (1a, 2a)
gravel
ground
Cross Section
1. When placing the Floor Plates (1a–6) on top of
the Base Plates (43, 44), align them as illustrated
above. The lip should extend slightly over the
edge of the Base Plate and the raised flange with
bolt holes should face inside the greenhouse.
2. Place the Front-Left Floor Plate (1a)
on top of the Base Plate (44). Lay the
Front-Right Floor Plate (2a) on top of it and line
up the 2 holes where the Plates overlap.
3. Fasten the Front Floor Plates (1a, 2a) together,
and secure to the Base Plate (44) using a
Hold-down Connector (47) over one of the
Bolts (65), see inset on facing page.
Item 93358
Rear/Side
Floor Plates
(3 – 6)
outside
greenhouse
Base Plate
(43, 44)
For technical questions, please call 1-800-444-3353.
4. Place the Side Floor Plates (4) on the
Side Base Plates (43) on the front-right
and rear left corners as illustrated. Lay the
Upper Side Floor Plates (3) on top so that the
three holes line up where the Plates overlap.
5. Fasten the Side Floor Plates (3, 4) together,
and secure to the Base Plates (43) using
3 Hold-down Connectors (47) on each side
of the greenhouse in the places illustrated;
see illustration and inset on facing page.
6. Lay the Rear-right Floor Plate (6) on top of the
Rear-left Floor Plate (5) so that the 2 holes
line up where the Plates overlap. Fasten the
Rear Floor Plates (5, 6) together through those holes.
7. Place the assembled Rear Floor Plates (5, 6)
on top of the Base Plates (44).
8. Secure the Rear Floor Plates (5, 6)
to the Base Plates (44) using
2 Hold-down Connectors (47) in the locations
shown; see illustration and inset on facing page.
Page 9