One Stop Gardens 93358 Owner's Manual page 7

Base Assembly Instructions
1. Excavate an area for the base of the greenhouse.
The area must be 10' 2" wide by 12' 2" long by
5" deep. The floor of the hole must be level
and square. The diagonal dimensions, from
corner to corner, should each be 15' 5".
2. Assemble the Base outside the hole as shown
below. Note that the angled edges of the
Base Plates (43, 44) need to face the corners of
the base. Use Base Bolts (68), Base Nuts (69), and
Connectors (45, 46) to secure the pieces together.
Item 93358 For technical questions, please call 1-800-444-3353.
3. With assistance, lower the Base into the hole.
The diagonal dimensions,
from outside corner to outside corner,
must be equal for the base to be square.
4. Fill the hole around the outside of the base with soil.
5. This base will need to be filled with about
40 cubic feet of gravel or another appropriate
fill material (not provided). The gravel should
reach up to about 1" below the lip of the base.
Page 7