One Stop Gardens 93358 Owner's Manual page 11

Corner Post Installation Instructions
1. There are 4 Corner Posts (7) to be attached
to the Floor Plates (1–6). The end with 2
holes should be at the bottom, as shown in
the illustration in the center of this page.
2. Attach one Corner Post (7) on the outside of
the right rear Floor Plates (3, 6) using 2 Normal
Bolts (65), 2 Hold-down Connectors (47),
and 2 Nuts (67), see inset - facing page.
49
80
(Rear)
7
(View from inside greenhouse.)
3. Fasten a Corner Bracket (49) to the top
of the Corner Post (7) over the Rear Floor
Plate (6) using one Normal Bolt (65) for
now. Install it angled up towards the center
of the greenhouse, as shown above.
4. Install a Double Brace Bolt (78) through the bottom
hole of the Corner Bracket (78). Place a Rear
Brace (31) over it with the arrow pointing towards
the Bolt. Also place Front/Rear Diagonal Strut (79)
over the Bolt, and thread on Nut (67) hand-tight.
5. Fasten a Side Diagonal Strut (80) to
the free top hole on the Corner Post (7)
using Brace Bolt (66) and Nut (67).
6. Fasten Struts (79, 80) to Floor Plates using
Brace Bolts (66), Hold-down Connectors (47),
and Nuts (67), see inset on facing page.
Allow Rear Braces (31) to hang free.
Item 93358
(Right)
31
79
For technical questions, please call 1-800-444-3353.
7. Repeat steps 2 through 6 for the left rear
Corner Post (7) on the left side. Keep
in mind that the connections will be
reversed compared to the right side.
TOP
8. Attach one Corner Post (7) on the outside
of the front left Floor Plates (1a, 3)
using 2 Normal Bolts (65), 2 Hold-down
Connectors (47), and 2 Nuts (67).
(Front)
(View from inside greenhouse.)
9. Insert a Brace Bolt (66) through the second
hole from the top of the Corner Post (7) over the
Front Floor Plate (1a). Place the bottom hole
of the Corner Bracket (49) over the Bolt with it
angled up towards the center of the greenhouse,
as shown above. Secure it using a Nut (67).
10. Fasten a Side Diagonal Strut (80) to the top
hole on the Corner Post (7) over the Side Floor
Plate using a Brace Bolt (66) and Nut (67).
11. Secure the Struts (79, 80) to the Floor Plates
using Brace Bolts (66), Hold-down Connectors
(47), and Nuts (67), see inset on facing page.
12. Repeat steps 8 through 11 for the right
front Corner Post (7) on the right side.
Keep in mind that the connections will be
reversed compared to the left side.
BOTTOM
(Left)
49
80
79
7
Page 11