One Stop Gardens 93358 Owner's Manual page 24

Phase 10: Window Assembly and Installation
65
38
67
39
65
38
67
39
65
(View from underneath
window, flat side of pieces.)
3. Remove the protective film from
both sides of the Window Pane (61).
Slide the Window Pane (61) into the three-
sided frame.
4. Slide the Bottom Window Frame (40)
onto the 2 Normal Bolts (65) and the
Window Pane (61). Secure it in place
with Nuts (67). Press on the heads of
the Bolts through the Window Pane to
allow the Nuts to thread on properly.
Page 24
67
39
65
65
For technical questions, please call 1-800-444-3353.
1. Attach the Side Window Frames (39) to the
Top Window Frame (38), as shown to the left. The threaded
shafts of the Bolts should extend out the bottom of the window.
2. Insert Normal Bolts (65) into the holes at other
end of the Side Window Frames (39), so that the
threads stick out the bottom of the window.
38
window, flat side of pieces.)
Parts in this phase are fastened
using
16 Normal Bolts (65),
16 Nuts (67),
and 8 Window Screws (71).
65
39
61
39
65
(View from underneath
67
40
67
Item 93358