Table of Contents
Advertisement
- Apply solution to lint free towel. Blot cartridge jet plate center several times, wipe away
excess residues from sides of jet plate.
not lift the cartridge up too high or flip cartridge upside down as this may cause the
cartridge to deprime. If deprime occurs the cartridge will need to be re-primed using the
NovaPrime or EasyPrime device.
- Apply solution to a 2
rear of cartridge. Proceed to flex driver cable cleaning prior to attaching cartridge – see
below.
INTERVAL
75 Plot Hours
- Apply solution to lint free towel. Clean entire
surface area of flex driver cable (for each
cartridge stall); wipe away excess residues from
cable surface.
NOTE:
nd
lint-free towel thoroughly wipe the electrical cable contacts at
COMPONENT
Flex Driver Cables
NovaJet 800 Series Training Guide
Do not wipe center jet plate area and do
CLEANING AGENT
NovaKlean /Isopropyl Alcohol
20
Advertisement
Table of Contents
