Kodak NovaJet 850 Training Manual page 14

4. Color Calibration (most important)
To activate the Color calibration select
(NOTE: the Vert Calib Test and Horiz. Calib. Test. will need to be activated and
adjusted) Seven horizontal patterns followed by seven vertical patterns will print. The
color calibration pattern should be performed whenever a cartridge is removed from the
carriage for cleaning or replacement. Choose the best value under each aligning set of
colors, i.e. yellow to magenta, then magenta to cyan, then cyan to black. Enter the most
correct value for each of the 14 fields. Note: stalls 1 through 4 correspond to the Left 4
cartridges. For the horizontal patterns and vertical patterns select the value which falls
below the best-aligned marks.
NOTE: Use the loupe (enclosed with the printer) and good lighting conditions to choose the
proper calibration value. Always perform this calibration when a cartridge is removed or
replaced.
Prime
Access Cartridge
Color Calib Menu
Calibration Menu
Utility Menu - Color Calib. Menu – Calib Test
Utility Menu
Display Settings
Print Settings
Service Menu
Exit
Color Calib Menu
Cyan Vertical Cyan Horizontal
Magenta Vertical Magental Horiz.
Yellow Vertical Yellow Horiz.
Calib Print Test
-6 -5 -4 -3 -2 -1
COLOR VERTICAL HEAD-TO-HEAD CALIBRATION
-8 -7 -6 -5 -4 -3 -2
COLOR HORIZONTAL HEAD-TO-HEAD CALIBRATION
NovaJet 800 Series Training Guide
Exit
0 1 2 3 4
-1 0 1 2 3 4 5
5 6 7
6 7
14