Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer
The current firmware type and version display on the PB22/PB32
screen when the printer is in Ready mode.
The screen of a PB22/PB32 running IPL firmware
Understanding the Printer Sounds
The PB22/PB32 plays sounds in response to several actions that you
can take with the printer. Use the following table to understand when
the sounds occur and what they mean.
Understanding the Printer Sounds
Sound
Power
Hardware
Button
Error
Understanding the Backlight
The screen backlight on the PB22/PB32 behaves the same way as a
screensaver on your PC. After a set amount of time elapses without
any user interaction, the backlight goes off. The screen backlight
turns on when:
•
6
IPL 11.1.0
OK
Occurs When:
•
You insert a battery in the printer.
•
The PB22/PB32 starts charging the battery.
•
You plug in the AC adaptor.
You open the media door, close the media door, or insert a
cable.
You press any of the PB22/PB32 buttons.
•
The printer cannot feed paper or print a job because of
a hardware issue such as the media door open, a paper
jam, or there is no media.
•
An error occurs such as a paper jam, a print error, or the
printer is out of range.
the printer begins printing.
PB22/PB32 Porotable Label and Receipt Printer User's Guide