Basic Configurations - 3Com Switch 4800G 24-Port Configuration Manual

83

Basic Configurations

Entering/Exiting System
View
Configuring the Device
Name
Configuring the System
Clock
B C
ASIC
While performing basic configurations of the system, go to these sections for
information you are interested in:
"Basic Configurations" on page 1021
■
"CLI Features" on page 1027
■
This section covers the following topics:
"Entering/Exiting System View" on page 1021
■
"Configuring the Device Name" on page 1021
■
"Configuring the System Clock" on page 1021
■
"Configuring a Banner" on page 1023
■
"Configuring CLI Hotkeys" on page 1025
■
"Configuring User Levels and Command Levels" on page 1026
■
"Displaying and Maintaining Basic Configurations" on page 1027
■
Follow these steps to enter/exit system view:
To do...
Enter system view from user view
Return to user view from system view
n
With the quit command, you can return to the previous view. You can execute the
return command or press the hot key <Ctrl+Z> to return to user view.
To do...
Enter system view
Configure the device
name
Configuring the system clock
Follow these steps to configure the system clock:
ONFIGURATIONS
Use the command...
system-view
sysname sysname
Use the command...
system-view
quit
Remarks
-
Optional
The device name is 3Com by default.
Remarks
-
-