3Com Switch 4800G 24-Port Configuration Manual page 1013

Setting to Output
System Information to
the Log Buffer
Setting to Output
System Information to
the SNMP NMS
To do...
Configure the channel
through which system
information can be output to
the trap buffer and specify the
buffer size
Configure the output rules of
the system information
Configure the format of the
time stamp
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output to
the log buffer and specify the
buffer size
Configure the output rules of
the system information
Configure the format of the
timestamp
To do...
Enter system view
Configuring Information Center
Use the command...
info-center trapbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }
* | log { level severity | state
state } * | trap { level severity
| state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center logbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }
* | log { level severity | state
state } * | trap { level severity
| state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
Use the command...
system-view
1013
Remarks
Optional
System information is output
to the trap buffer by default
with a default channel of
channel 3 (known as
trapbuffer) and a default
buffer size of 256.
Optional
Refer to Table 79 for the
output rules of the system
information.
Optional
The time stamp format for
log, trap and debugging
information is date by
default.
Remarks
-
Optional
Enabled by default.
Optional
Refer to Table 77 for default
channel names.
Optional
System information is output
to the log buffer by default
with a default channel of
channel 4 (known as
logbuffer) and a default
buffer size of 512.
Optional
Refer to Table 79 for the
output rules of the system
information.
Optional
The time stamp format for
log, trap and debugging
information is date by
default.
Remarks
-