Security Menu - HP ProBook 6455b Maintenance And Service Manual

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer.
Select
Setup BIOS Administrator Password
User Management (requires a BIOS administrator password)
Password Policy (requires a BIOS administrator password)
HP SpareKey
Always Prompt for HP SpareKey Enrollment
Allow Reset of HP ProtectTools security keys
Change Password
HP SpareKey Enrollment
DriveLock Passwords
Automatic DriveLock
Disk Sanitizer
System IDs
170 Chapter 5 Computer Setup
To do this
Set up a BIOS administrator password.
●
Create a new BIOS user account.
●
View a list of ProtectTools users.
Revise password policy criteria.
Enable/disable HP SpareKey (disabled by default).
Enable/disable HP SpareKey enrollment (disabled by
default).
Enable/disable reset of HP ProtectTools security keys.
Enter, change, or delete a BIOS administrator password.
Enroll or reset HP SpareKey, which is a set of security
questions and answers used if you forget your password.
●
Enable/disable DriveLock on any computer hard drive
(enabled by default).
●
Change a DriveLock user password or master password.
NOTE: DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
Enable/disable Automatic DriveLock support.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive or the drive in the upgrade bay.
CAUTION: If you run Disk Sanitizer, the data on the
selected drive is destroyed permanently.
Enter a user-defined computer asset tracking number and
ownership tag.