Mass Storage Device - HP ProBook 6455b Maintenance And Service Manual

Mass storage device

NOTE: The mass storage device spare part kit includes a bracket.
Description
Hard drive:
500-GB, 7200-rpm
320-GB, 7200-rpm
250-GB, 7200-rpm
Hard Drive Hardware Kit (not illustrated, includes hard drive bracket and 4 screws)
Solid-state drive:
128-GB, 2.5-in solid-state drive
80-GB, 2.5-in solid-state drive
Before removing the mass storage device, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the mass storage device:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.0×6.0 captive screws (1) that secure the mass storage device cover
to the computer.
3. Lift the left side of the cover (2) to detach it from the computer.
Battery on page 79).
Component replacement procedures
Spare part number
634919-001
626978-001 and
603783-001
635225-001
630891-001
613356-001
625133-001
83