GCA70–246
7
7.1
Using The Recall/flash
•
If your system has been configured for flash,
1. Press TAP to generate a timed flash signal while on line.
•
If your system has been configured for recall,
1. Press RECALL (TAP) to disconnect as if you had hung up.
7.2
Paging
•
To use external paging,
1. Lift handset and listen for intercom dial tone.
2. Dial assigned page access code.
3. Make announcement.
•
To use zone paging,
1. Lift handset and listen for intercom dial tone.
2. Dial zone number - (84, 85, 86, or 87 for all-call).
3. Make announcement.
4. Hang up handset or wait for an answer.
•
To answer all call or zone paging from any station,
1. Lift handset and listen for intercom dial tone.
2. Dial 88. Meet paging party on line.
Using The Other Telephone Features
Using The Other
Telephone Features
Single Line Station User's Guide 7 – 1