Pnp/Pci Configurations - Foxconn 400M01 Series Manual

PnP/PCI Configurations

PNP OS Installed (Default: No)
Set this field to "Yes" if you are running Windows 95, which is PnP compatible.
It is recommended to keep the default setting. The setting values are: No, Yes.
Reset Configuration Data (Default: Disabled)
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time that the machine is
turned on. The setting values are: Disabled and Enabled.
Resources Controlled By (Default: Auto(ESCD))
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS automatically
distributes interruption resources. If you install ISA cards not supporting PnP,
you will need to select "Manual" and manually adjust interruption resources in
the event of hardware conflicts. However, since this motherboard has no ISA
slot, this option does not apply.
IRQ Resources
Press the <Enter> key, then manually set IRQ resources.
PCI/VGA Palette Snoop (Default: Disabled)
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
The setting values are: Disabled and Enabled.
Assign IRQ For VGA (Default: Enabled)
This option is used to set whether BIOS will assign IRQ for VGA. The setting
values are: Disabled and Enabled.
62
400M01-FOXCONN-V1.0-BIOS-en-030304.p65
Chapter 3
PnP/PCI Configurations Menu
400M01 Series User Manual
62
BIOS Description
2004-3-18, 13:49