Foxconn 400M01 Series Manual page 29

Expansion Slots
This motherboard includes three 32-bit master PCI bus slots, one AGP slot,
one CNR slot (optional).
PCI Slots
The expansion cards can be installed in the three PCI slots. When you install
or take out such cards, you must make sure that the power plug has been
pulled out. Please read carefully the instructions provided for such cards, and
install and set the necessary hardware and software for such cards, such
as the jumper or BIOS setup.
AGP Slot
This motherboard has an AGP slot that supports 1.5V AGP card. AGP is an
interfacing specification designed to display 3D images. It provides a special-
ized 66Mhz, 32-bit channel to allow the graphic controller to directly access the
master memory, and supports 4X and 8X speeds.
400M01-FOXCONN-V1.0-HW-en-030304.p65
Chapter 2
400M01 Series User Manual
29
Installation Instructions
PCI Slots
AGP slot
2004-3-18, 13:51
29