Power Supply - Foxconn 400M01 Series Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
20-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
Attention:
You have to press the power button for more than four seconds if
you change the default "Instant-Off" setting to "Delay 4 Sec" from
the "Soft-Off by PWRBTN" option in the BIOS "Power Manage-
ment Setup".
400M01-FOXCONN-V1.0-HW-en-030304.p65
Chapter 2
1
11
400M01 Series User Manual
17
Installation Instructions
20-pin ATX power connector
3D3V_SYS 5V_SYS 5V_SYS Power OK
3D3V_SYS Ground Ground Ground
5V_SB
3D3V_SYS Ground Ground Ground 5V_SYS
-12V_SYS PS-ON Ground NC 5V_SYS
2004-3-18, 13:51
12V_SYS
10
20
17