Foxconn 400M01 Series Manual page 109

b. Guide to Configure RAID 1
STEP 1: Select the option Create Array in the main menu of BIOS configura-
tion utility, then press <Enter> key.
STEP 2: Select the option Array Mode, then press <Enter> key to display the
pop-up menu of RAID system setting.
STEP 3: Select RAID 1 for data protection from the menu and press <Enter>.
From this point, you may choose to auto-configure the RAIDarray by
selecting Auto Setup for Data Security or manually configure the RAID
array . Please continue with the next step if you want to manually con-
figure the RAID array. Otherwise, proceed to step 3-3.
3-1.
Select the option Select Disk Drives, then press <Enter>. Use arrow
keys to select disk drive(s), then press <Enter> to mark selected drive.
An asterisk is placed before the selected drive.
3-2.
Select the option Start Create Process and press <Enter> to setup
hard disk for RAID system.
3-3.
Then the confirmation message appears:
Save the data on source disk to mirror after creation? (Y/N)
Press <Y> to confirm or <N> to return to the configuration options.
400M01-FOXCONN-V1.0-BIOS-en-030304.p65
400M01 Series User Manual
109
Appendix
109
2004-3-18, 13:49