Foxconn 400M01 Series Manual page 60

Chapter 3 BIOS Description
IRQs Activity Monitoring Menu
Primary INTR (Default: ON)
Selecting "ON" will cause the system to wake up from power saving modes
if activity is detected from any enabled IRQ channels. The setting values
are: ON and OFF.
IRQ3 (COM2) (Default: Enabled)
This option is used to enable or disable IRQ3 (COM2) activity monitoring. The
setting value are: Disabled and Enabled.
IRQ4 (COM1) (Default: Enabled)
This option is used to enable or disable IRQ4 (COM1) activity monitoring. The
setting value are: Disabled and Enabled.
IRQ5 (LPT2) (Default: Enabled)
This option is used to enable or disable IRQ5 (LPT2) activity monitoring. The
setting value are: Disabled and Enabled.
IRQ6 (Floppy Disk) (Default: Enabled)
This option is used to enable or disable IRQ6 (Floppy Disk) activity monitoring.
The setting values are: Disabled and Enabled.
IRQ7 (LPT1) (Default: Enabled)
This option is used to enable or disable IRQ7 (LPT1) activity monitoring. The
setting value are: Disabled and Enabled.
IRQ8 (RTC Alarm) (Default: Disabled)
This option is used to enable or disable IRQ8 (RTC Alarm) activity monitoring.
The setting values are: Disabled and Enabled.
IRQ9 (IRQ2 Redir) (Default: Disabled)
This option is used to enable or disable IRQ9 (IRQ2 Redir) activity monitoring.
The setting values are: Disabled and Enabled.
60
400M01 Series User Manual
60 2004-3-18, 13:49
400M01-FOXCONN-V1.0-BIOS-en-030304.p65