The Print Result Is Not What Was Expected - Dell C7765dn User Manual

23 Problem Solving

The Print Result is Not What was Expected

If the print result is not what was expected, identify the symptom in the following table to
perform the remedy.
Symptom
Cannot print in
color.
Outputs are not
stapled.
The document is
printed on a
different paper
size than
specified.
The image on the
document edges is
missing on the
output.
The printed font
differs from the
font specified on
the computer.
The printout is
not offset.
Printing is slow.
The specified
print options are
not enabled.
The document
edges are missing
on the printout.
The output color
differs between
Secure Print and
Print Stored File.
582
Cause
[Output Color] is set to
[Black & White].
The Finisher is not installed.
The number of pages to be
stapled exceeds the maximum
number for stapling.
The document size is
different from the paper size
loaded in the specified tray.
The image is larger than the
printable area.
Font replacement is set on
the print driver.
The machine does not offer
the Offset feature.
[High Resolution] is selected
for [Image Quality].
The print driver for another
model is used.
The required optional kit is
not installed on the machine.
The image is larger than the
printable area.
This is because the print path
is different. The output color
of Print Stored File is
reproduced by the presence or
absence of dots, as with
copying or faxing. On the
other hand, the output color
of Secure Print is reproduced
using density by default, as
with printing.
Remedy
Set [Output Color] to [Auto Detect] or
[Color].
The Finisher is required to staple. Install the
Finisher, or change the print option settings
to cancel stapling.
You cannot staple more than 50 pages.
Reduce the number of pages to 50 or fewer.
Change the size of paper in the tray, or
change the print option to specify a tray that
contains the correct sized paper.
Expand the printable area of the machine, or
reduce the image size on the printout.
Check the font replacement table.
To output offset, the Offset Stacking Module
or the Finisher is required.
When image data, such as photos, is printed
with the high resolution, the print speed
becomes slow. Select [Standard] for [Image
Quality].
Install the print driver for the model.
Check the optional components installed on
the machine, and set [Installable Options]
under [Configuration] in the print driver
again.
Expand the printable area of the machine, or
reduce the image size on the printout.
To closer match the color of Secure Print and
files in folder, select [On] in [Image Options]
> [Print Page Mode] on the [Advanced] tab
of the print driver settings.