Dell C7765dn User Manual page 623

Status Code
016-704
[Cause]
[Remedy] Delete unnecessary files from the folder, and save the file.
016-705
[Cause]
[Remedy] Use the print driver appropriate for the machine.
016-706
[Cause]
[Remedy] Delete unnecessary files from the machine, and delete unnecessary Secure Print users.
For more information on deleting users for Secure Print files, refer to "Printing and Deleting
Stored Jobs" (P.208).
016-708
[Cause]
[Remedy] Delete unnecessary data from the hard disk to free up disk space.
016-709
[Cause]
[Remedy] Contact Customer Support at dell.com/contactdell.
016-711
[Cause]
[Remedy] Take one of the following measures, and then try sending the mail again.
016-712
[Cause]
[Remedy] Increase the resolution or scan area.
016-713
[Cause]
[Remedy] Enter the correct passcode.
016-714
[Cause]
[Remedy] Create a new folder or specify an existing folder.
016-715
[Cause]
[Remedy] Enter the correct password of the ESCP form.
016-716
[Cause]
[Remedy] Delete unnecessary files and users from the hard disk.
Refer to "Printing and Deleting Stored Jobs" (P.208).
016-717
[Cause]
[Remedy] Take one of the following measures:
The folder is full, and hard disk capacity is insufficient.
You have not used the print driver for the machine.
If the error still is not resolved, contact Customer Support at dell.com/contactdell.
The hard disk space is insufficient because the number of Secure Print users exceeded
the maximum limit.
Unable to annotate because of insufficient hard disk space.
An error occurred during print processing.
The upper limit for the e-mail size has been exceeded.
• Reduce the number of pages of the document.
• Lower the resolution with [Resolution].
• Reduce the magnification with [Reduce / Enlarge].
• Ask your system administrator to increase the value set for [Maximum Total Data
Size].
• For color scanning, set [MRC High Compression] to [On] under [File Format].
Unable to process the document because the specified scan area is too small.
The passcode entered does not match the passcode set on the folder.
The specified folder does not exist.
The machine failed to access the ESCP form because the password of the ESCP form
does not match.
Unable to spool TIFF file because of insufficient hard disk space.
Unable to create a Transmission Report - Job Undelivered or a Transmission Report
because the transmission result information required for creating the report is not stored
in the machine's memory.
• Execute the jobs for large size Internet fax documents (about 2GB) by splitting each
document to minimize memory or HDD usage.
• If many scan or Internet fax documents are being processed, wait until the jobs are
completed to execute a new job.
• After completing the job that you want to confirm in a report, do not execute 200 or
more jobs before printing the report.
Cause and Remedy
Status Code
623