Impex MD-4100 Owner's Manual page 13

STEP 5 (See Diagram 5 & Cable Loop Diagram)
A.) Attach the 135" Upper Cable (#54) to the front opening on the Upper Frame (#11). Attach a Pulley
(#42) to the opening. Secure it with one M10 x 2 1/8" Allen Bolt (#60), two Ø 1 1/8" x 3/8" Pulley
Bushings (#58), and one M10 Aircraft Nut (#75). Make sure the ball stopper on the Cable is
underneath the Frame.
B.) Draw the Cable over the Pulley along the Upper Frame to the opening between the two Cover
Brackets (#12). Attach a Pulley to the opening. Secure it with one M10 x 2 3/8" Allen Bolt (#61),
two Ø 1" x ½" Pulley Bushings (#57), and one M10 Aircraft Nut (#75).
C.) Draw the Cable around the Pulley then downward. Attach a Pulley in between the two Double
Floating Pulley Brackets (#30). Secure the Pulley with one M10 x 1 ¾" Allen Bolt (#62), two Ø ¾"
Washers (#73), and one M10 Aircraft Nut (#75). Let the Bracket hanging for now.
D.) Draw the Cable around the Pulley then up to the opening on the Weight Glide Post (#13). Attach
a Pulley to the opening. Secure it with one M10 x 2 3/8" Allen Bolt (#61), two Ø 1" x ½" Pulley
Bushings (#57), and one M10 Aircraft Nut (#75).
E.) Draw the Cable around the Pulley then down to the Sliding Weight Post (#28). Secure the Cable
to the Sliding Weight Post with one M10 x 1" Allen Bolt (#59), two Ø ¾" Washers (#73), and one
M10 Aircraft Nut (#75).
12