Sending And Receiving Non-Verbal Messages; Using The Messaging Feature - Comdial and FX Series User Manual

GCA70–198
5
5.1

Using the Messaging Feature

To turn on the message-waiting light and broken dial tone at an
idle telephone,
1. Press INTERCOM.
2. Dial 3.
3. Dial extension number of the station you want to alert. The
message-waiting light of that station will flash.
You can also turn on the message-waiting light and broken dial
tone at another station when that station is busy,
1. Hear the busy tone and remain on the line.
2. Press MSG.
3. Hang up.
To turn off the message waiting light at a busy or idle station,
1. Press INTERCOM.
2. Dial # 3.
3. Dial extension number of alerted station. The message-waiting
light of that station will turn off.

Sending And Receiving Non-Verbal Messages

Sending And Receiving
Non-Verbal Messages
LCD Station User's Guide 5 – 1