Programming Your Telephone; Programmingforspeeddialing - Comdial Digitech 7700S Series User Manual

Programming Your Telephone
Programming For Speed Dialing
Speed dialing is a feature that lets you:
l
dial intercom numbers, lengthy or frequently used numbers, and
feature codes using one or two buttons,
You can store numbers for speed dialing at the following locations:
l
at any programmable button that is not now assigned as afixed
feature button or SHIFT button by the system installer,
l
on a secondary level under a DSS button, a feature button, a line
button or other speed dial button,
l
at the 10 keypad numbers.
The outside numbers and feature codes am commonly referred as per-
sonal speed dial numbers whether they are stored at the programmable
button locations or at the 10 keypad number locations.
The intercom numbers are referred to as direct station selection (DSS)
numbers regardless of where they are stored. Plus, the light associated
with the DSS button is referred as the busy lamp field (BLF) light. Typi-
cally, DSS numbers are stored at the upper button grouping.
Before you begin programming, write down:
l
The line you will use to access each outside number.
l
The number that you are storing.
As you program numbers, fill in the identification strips on your
telephone. Write first level numbers on the ID strips and write second
level numbers and/or speed dial numbers on the index pullout directory
in the front of your telephone.
You can fill out the charts on the next page, if you wish, for a personal
record of your stored numbers.
60