Options While On Calls; Volume Control; Call Waiting - AT&T TL7600 User Manual

Operation

Options while on calls

Volume control

To adjust the listening volume:
While on a call, press the VOLUME /
headset to adjust the listening volume.
NOTE: When the volume reaches the minimum or maximum setting, you
hear 3 quick beeps.

Call waiting

If you subscribe to call waiting service offered by your telephone
service provider, you hear a beep if there is an incoming call
while you are already on a call.
• If you have registered the TL7600 to a TL7610/TL7611/TL7612
headset base that is connected to a multiple line or digital
business corded telephone, you must answer call waiting using
the corded telephone base (see your telephone user's manual
for instructions).
To end call waiting call, press
up the corded handset by placing it in the telephone base.
• For all other installations, press and hold
the side of the headset to put your current call on hold and
answer the new call. You can press and hold
any time to switch back and forth between calls.
To end a call waiting call, press
+ –
keys on the side of the
/OFF on the headset and hang
ON
MUTE
/OFF on the headset.
ON
22
/FLASH on
/FLASH at
MUTE