Getting started
Battery charging
After installing the battery, charge the headset by placing it on
the headset charger as shown below. Before registration, the
headset ON/OFF light flashes twice every five seconds whether
the headset is charging or not. After registration, the headset
ON/OFF light is on when the headset is charging.
1. Insert the headset into
the charging cradle.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT191545). To obtain a replacement battery, visit our website at
www.telephones.att.com
In Canada, dial
Insert
1 (866) 288-4268
Push
2. Push the headset downward
until the ON/OFF light on the
headset turns on.
1 (800) 222-3111
or call
.
8
ON/OFF light
.