Headset Attachments; Over The Ear Hook - AT&T TL7600 User Manual

Getting started

Headset attachments

Over the ear hook

To attach the ear hook to the headset:
1. Remove any headset attachment connected to the headset.
2. Insert the earpiece into the ear hook, as shown in Figure 1.
3. Press the ear hook onto the earpiece, as shown in Figure 2.
4. Hook the headset onto the desired ear. Adjust the angle of
the headset until the microphone is pointing towards your
mouth, as shown in Figure 3.
NOTE: Firmly grip the earpiece with one hand whenever adjusting the
headset microphone up or down, as shown in Figure 3.
Figure 1
Figure 3
12
Figure 2