Getting started
Charger installation
1.
Plug the small end of the
charger power adapter into
the power jack at the bottom
of the headset charger. Place
the power cord in the power
cord slot.
IMPORTANT INFORMATION
1.
Use only the power adapter supplied with this product. To
order a replacement power adapter, visit our website at
www.telephones.att.com
In Canada, dial
2.
The power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed
to hold the plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
1 (866) 288-4268
2.
Plug the charger power
adapter into a power
outlet not controlled by a
wall switch.
1 (800) 222-3111
, or call
.
6
.