Over The Head Band - AT&T TL7600 User Manual

Getting started
Headset attachments

Over the head band

To attach the headset to the headband for wearing on the left
or right ear:
1. Remove any headset attachment currently connected to
the headset.
2. Insert the earpiece into the loop of the ear pad, as shown in
Figure 8.
3. Gently press the earpiece inward until it clicks into place, as
shown in Figure 9.
4. Adjust the headband to fit your head. Adjust and rotate the
angle of the headset until the microphone is pointing towards
your mouth, as shown in Figure 10.
Ear pad
NOTES:
• To wear on the other ear, rotate the headset within the loop of the ear pad.
• Firmly grip the padded earpiece with one hand whenever adjusting the
headset microphone up or down, as shown in Figure 10.
Figure 8
15
Figure 9
Figure 10