Table of Contents
Advertisement
Hardware Installation
2-3.1 CPU Installation
To perform the installation of your new SY-TISU Motherboard, follow the
steps below:
Mark your CPU Frequency:
your FC-PGA CPU that should be clearly marked on the CPU cover.
FSB 66MHz
400MHz(66 x 6.0)
433MHz(66 x 6.5)
FSB 100MHz
500MHz(100x5.0)
550MHz(100x5.5)
FSB 133MHz
533MHz(133x4.0)
600MHz(133x4.5)
CPU Mount Procedure:
Tualatin processor that you have purchased separately, follow these
instructions.
1.
Lift the socket handle up to a vertical position.
466MHz(66 x 7.0)
533MHz(66 x 8.0)
500MHz(66 x 7.5)
566MHz(66 x 8.5)
600MHz(100x6.0)
700MHz(100x 7.0)
650MHz(100x6.5)
750MHz(100x 7.5)
667MHz(133x5.0)
800MHz(133x6.0)
733MHz(133x5.5)
866MHz(133x6.5)
To mount the Pentium® III, Celeron &
Record the working frequency of
600MHz(66 x 9.0)
633MHz(66 x 9.5)
800MHz(100x 8.0)
850MHz(100x 8.5)
933MHz(133x7.0)
1GHz(133x7.5)
18
SY-TISU
667MHz(66 x10.0)
700MHz(66 x10.5)
900MHz(100x9.0)
1.13GHz(133x8.0)
1.2GHz(133x8.5)
Advertisement
Table of Contents
