SOYO SY-TISU User Manual page 37

Hardware Installation SY-TISU
3. Cooling Fan Installation
(1) CPU Cooling Fan
After you have seated the CPU properly on the processor, attach the 3-pin fan
cable to the CPUFAN connector on the Motherboard. The fan will stop when
the system enters into Suspend Mode. (Suspend mode can be enabled from the
BIOS Setup Utility, [SOYO COMBO] menu.)
To avoid damage to the system, install according to the following pin
assignment:
CPU Cooling Fan
CPUFAN Pin Assignment
3
1 2
GND 12V SENSOR
33