Table of Contents
Advertisement
Hardware Installation
2-3.1 CPU Installation
To perform the installation of your new SY-7IWB V1.0 Motherboard,
follow the steps below:
Mark your CPU Frequency:
your CPU that should be clearly marked on the CPU cover.
300MHz (66 x 4.5)
433MHz (66 x 6.5)
This Motherboard is designed to support processors with 100MHz FSB.
However, Socket 370 processors with 100MHz FSB are not available at
present.
CPU Mount Procedure:
have purchased separately, follow these instructions.
1.
Lift the socket handle up to a vertical position.
2.
Align the blunt edge of the CPU with the matching pinhole
distinctive edge on the socket.
333MHz (66 x 5.0)
466MHz (66 x7..0)
To mount the Celeron
20
Record the working frequency of
366MHz (66 x 5.5)
500MHz (66 x7.5)
TM
processor that you
SY-7IWB V1.0
400MHz (66 x 6.0)
Advertisement
Table of Contents
