Table of Contents
Advertisement
Motherboard Description
MOTHEBOARD DESCRIPTION
1-1 INTRODUCTION
The SY-TISU AGP/PCI/CNR Motherboard is a high-performance
Socket 370 processor supported ATX form-factor system board.
SY-TISU uses the 815EP B-step Chipset technology. This
Motherboard is fully compatible with industry standards
Supports Intel® FC-PGA processors
- FSB 66MHz: Celeron II (up to 900MHz)
- FSB 100MHz: Pentium® III (up to 1GHz)
- FSB 133MHz: Tualatin (up to 1.2GHz)
Coppermine refers to Intel's code name for Intel® Pentium®
III processors and Intel® Celeron 533A MHz and > 566MHz
processors based on Coppermine-core processors (current and
D-Step). Coppermine supports the AGTL + interface.
Tualatin refers to Intel's code name for the next generation
Intel® Pentium® III processor based on cutting edge 0.13
micron (130 nanometer) technology in an FC-PGA2 package.
Tualatin supports the AGTL interface.
Universal PGA370 refers to Intel 815EP B-step chipsets using the
"universal" PGA370 socket. In general, these designs support
66/100/133 MHz system bus operation, VRM 8.5 DC-DC converter
guidelines, and both the Coppermine and Tualatin processors in
single-microprocessor based designs.
Supports VIA Cyrix processors
Cyrix III (500~700MHz)
Supports 66/100/133 MHz Front Side Bus Frequency
Auto-detect CPU voltage
PC99, ACPI
Ultra DMA33/66/100 (ATA 33/66/100)
Supports Wake-On-LAN (WOL)
Supports PC-100 and PC-133 SDRAM
Supports ACPI Suspend Indicator
Chapter 1
1
SY-TISU
Advertisement
Table of Contents
