SOYO SY-TISU User Manual page 69

BIOS Setup Utility
3-5.3 IDE HDD Block Mode
IDE HDD Block Mode
3-5.4 Others Optional
Setting
Password
POWER ON
Function
Hot KEY
Mouse Left
Mouse Right
BUTTON-ONLY Disables the Wake-Up by
Keyboard 98
If [POWER ON Function] is set to [Password]
Enter (your
KB Power ON
Password password)
If [POWER ON Function] is set to [Hot Key]
Hot Key Power Ctrl-F1~F1
ON 2
3-5.5 FDC Controls
FDC Controls
Onboard FDC
controller
Setting Description
Disabled
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function.
Description
Enables you to wake-up the
system by entering a password at
the keyboard.
You can wake-up the system by
pressing the key combination of
your choice (Ctrl-F1~F12).
Enables waking up the system by
pressing either the right or left
mouse button.
Keyboard function.
Set the password that will wake-up your
system.
Choose the key combination that will
wake-up the system. [Ctrl-F1 to Ctrl-F12]
Setting Description
Disabled Turn off the on-board
floppy controller
Enabled Use the on-board floppy
controller
65
SY-TISU
Note
Default
Note
Default
Note
Default