Jøtul GF 100 DV II Nordic QT; GF 200 DV II Lillehammer Installation And Operation Instructions Manual page 13

Max. 4 ft.
Horizontal
Run
Max. Two
90° Elbows
or One 90°
and Two
45° Elbows
Figure 13. Horizontal Termination with Vertical
2 1/2”
12 ” 64 mm
305
3”
mm
76 mm
Figure 14. Termination Clearance to overhangs
Wall Thimble
and Trim Collar
Wall Shield Installation
The decorative Wall Shield, included in the Miscellaneous
Hardware bag, is used to obscure the vent hole in the wall
in installations vented directly off the rear of the stove.
Follow this procedure:
Max. 15 ft.
Vertical Vent
1. Remove the top two 1/4" hex head screws from the rear
Run
2. Align the holes in the wall shield with the holes in the
3. Secure the wall shield to the stove with the two 1/4"
Figure 15.
Wall Shield installation.
shroud of the stove.
rear shroud.
hex head screws. See fig. 16.
138003_Rev_K / 7.29.10
13