Table of Contents
Advertisement
ProxyServer User Guide
Running Diagnostics
Clicking on the Built-in Test button on the Proxy Setup screen displays the Diagnostics dialog box,
assuming the ProxyServer is connected to a COM port on your PC. (If you are connected through a
LAN to the ProxyServer, you are unable to get to the Diagnostics screen.) Select either Ethernet
(i.e., LAN) or WAN 1 (i.e., ISDN line) for testing, then click the Test button to start testing the port you
selected.
Note: Test will FAIL unless loopback plugs are used on the port you are testing.
WAN Device Configuration
You can configure the ProxyServer for ISDN by selecting the WAN Device Configuration command
from Start | Programs | ProxyServer 2.10 | WAN Device Configuration (Windows 98/95 or
Windows NT) or from the ProxyServer 2.10 program group (Windows 3.1x).
The ProxyServer Print Console screen is displayed. Before you begin entering AT commands, you
must first disable the Link Control (Dial-on-demand) option on the WAN Port Setup dialog box. For
information regarding AT commands, refer to Appendix D.
48
MTPSR1-202ST
Advertisement
Table of Contents
